VTEK PPF installation in Doha, Qatar

A VTEK-authorised partner centre in Doha, booked and managed by ABK. ABK supplies the genuine film, confirms your slot, inspects the finished car and stays your single point of contact.

ABK is VTEK's authorised distributor in Qatar and supplies the film for every job from its own stock, so it never comes from a third party. Only VTEK-authorised installers fit it; the car is photographed at drop-off, ABK inspects the finish before handover, and the VTEK warranty is registered to your car.

Weather Armor PRO suits most daily drivers: 7.5 mil (190 µm) gloss TPU with heat-activated self-healing and a 10-year VTEK warranty. PRO PLUS is an 8.0 mil (203 µm) film with VTEK's ultra-gloss finish, a hydrophobic top coat and a 12-year warranty, for 18% more. MATTE gives a satin finish (5-year warranty) and PRISM changes the colour (5-year warranty).

A full front covers the panels that take stone chips on Qatar's highways — bonnet, front bumper, fenders, mirrors and headlights — from QAR 1,599 on a sedan. A full body (from QAR 3,999) adds the doors, sides, roof and rear against sand abrasion, parking scuffs and wash swirls, and suits a new or high-value car you plan to keep.

Yes. Pick "Choose parts" in the quote builder and tap the panels you want. The estimate updates as you go, starts at QAR 500 and never exceeds the full-body price for your car; we confirm the final price on WhatsApp.

Typically the same day for a front-end kit, one day for a full front and two to three days for a full body, including curing time. We confirm the exact time with your slot.

Once we confirm your slot you pay in full by bank transfer or cash. Cancel up to 48 hours before for a full refund; one reschedule is free.

VTEK's warranty covers the film itself against yellowing, cracking and delamination for 5 to 15 years depending on the film. ABK's 12-month workmanship cover handles the fitting: lifting, bubbles or edges letting go.

Yes. Tell us in the booking form; old film or wrap has to be removed first, and we include that in the confirmed price.

Yes. VTEK Weather Armor PRO and PRO PLUS use 7.5 to 8.0 mil (190–203 µm) aliphatic TPU. The elastomeric urethane absorbs high-speed gravel impacts and deflects abrasive desert sand without puncturing. Fine micro-scratches from dust storms automatically self-heal under Qatar's natural sun heat.

Wait 48 to 72 hours before the first wash so the installation slip solution fully cures and edges bond firmly. After curing, hand wash with a pH-neutral car shampoo like Autotriz Rich Foam. Avoid holding high-pressure spray nozzles closer than 40 cm from film edges.

Genuine TPU (Thermoplastic Polyurethane) is an optically clear, self-healing polymer that does not yellow or crack in Qatar's 45°C+ summer heat, backed by a 10 to 12-year warranty. Cheap PVC or TPH films turn cloudy, yellow, and brittle within 6 to 12 months, and their harsh adhesives can damage clear coats upon removal. ABK is Qatar's authorized VTEK distributor, supplying only 100% genuine TPU.

Yes. Applying a 9H ceramic coating (such as Autotriz 3D Matrix Ultra) over VTEK PPF is the gold standard for Qatar. The PPF provides impact defense against rock chips and sand abrasion, while the ceramic layer provides deep gloss, hydrophobicity, and protection against mineral water spots from Doha tap water.

Installations are carried out in VTEK-authorized clean-booth partner studios in Doha equipped with dust filtration and climate control. Location and drop-off instructions are confirmed with your appointment slot, easily accessible from Mesaimeer, Al Rayyan, Lusail, West Bay, The Pearl, Al Wakrah, and Al Khor.