VTEK PPF installation in Doha, Qatar

At ABK in Doha, installed VTEK Weather Armor PRO costs QAR 3,999 for a full body on a sedan or coupe, QAR 4,799 on a mid-size SUV or crossover and QAR 5,499 on a large SUV (Land Cruiser, Patrol, Defender), so sedans and mid-size SUVs are both under QAR 5,000. A full front starts at QAR 1,599 and a front-end kit at QAR 899. Prices include the film, the fitting, the 10 years VTEK film warranty and ABK's 12-month fitting guarantee. PRO PLUS and MATTE cost more and PRISM colour change is priced per car; every price is in the table on this page.

A VTEK-authorised installer in Doha, booked and managed by ABK. VTEK's warranty only covers film professionally installed by authorised installers. ABK supplies the genuine film, confirms your slot, photographs the car at drop-off, inspects the finish at handover and stays your single point of contact. The installer's details are recorded on your VTEK e-warranty.

Check it in VTEK's own system. Every job is registered on VTEK's NFC e-Warranty, and on nfc.vtekfilms.com/verify you enter your plate number and phone number to see the product installed, the installation date, the installer's details and the warranty terms. VTEK's own contact page also lists our Mesaimeer showroom as its Qatar contact. ABK supplies the film from its own stock, photographs the car at drop-off and inspects the finish before handover.

Weather Armor PRO suits most daily drivers: gloss finish, 10 years VTEK warranty, full body from QAR 3,999. PRO PLUS is the step-up gloss grade (10 years VTEK warranty) from QAR 4,799; ask us on WhatsApp what it adds for your car. MATTE gives a satin finish (5 years warranty) from QAR 4,799, and PRISM changes the colour (5 years warranty) and is priced per car. ULTIMATE, VTEK's flagship gloss film with a 15 years warranty, is available by special roll order.

A full front covers the panels that take stone chips on Qatar's highways — bonnet, front bumper, fenders, mirrors and headlights — from QAR 1,599 on a sedan. A full body (from QAR 3,999) adds the doors, sides, roof and rear against sand abrasion, parking scuffs and wash swirls, and suits a new or high-value car you plan to keep.

Yes. Pick "Choose parts" in the quote builder and tap the panels you want. The estimate updates as you go, starts at QAR 500 and never exceeds the full-body price for your car; we confirm the final price on WhatsApp.

Typically the same day for a front-end kit, one day for a full front and two to three days for a full body, including curing time. We confirm the exact time with your slot.

Tap "Get my instant quote" on this page, choose your car, coverage and film, and send the quote on WhatsApp. We confirm film stock, your slot and the final price during opening hours (Saturday to Thursday, 10:00 – 13:00 and 16:00 – 22:00). You pay in full by bank transfer or cash once the slot is confirmed, drop the car at the confirmed Doha location, and collect it after our handover inspection.

Once we confirm your slot you pay in full by bank transfer or cash. Cancel up to 48 hours before for a full refund; one reschedule is free.

VTEK's film warranty covers the film itself against manufacturing defects such as bubbling, cracking, peeling and fading when an authorised installer fits it: PRO 10 years, PRO PLUS 10 years, MATTE and PRISM 5 years, and ULTIMATE 15 years (special roll order), as listed on vtekfilms.com/warranty. ABK's separate 12-month fitting guarantee covers the installation itself: edge lifting, bubbles or misalignment. It does not cover accidents, stone impacts, improper washing or pressure-washing the film edges, repairs done elsewhere or paint defects recorded at drop-off.

Message ABK on WhatsApp with photos. We inspect it and arrange the repair with the installer; covered fitting problems in the first 12 months are put right at no cost. For a film defect we take the claim to VTEK: its terms start every claim with the original installer, and VTEK makes the final decision on whether it is a manufacturing defect. VTEK also says its warranty can be transferred to a new owner with proof of purchase.

Yes. Tell us in the booking form; old film or wrap has to be removed first, and we include that in the confirmed price.

Yes on a new car: VTEK says factory paint is fully cured when the car leaves the assembly line. After a respray VTEK recommends waiting about 2 months so the paint cures fully. Tell us in the booking form if the car was recently repainted.

PPF takes the hit instead of your paint. The transparent polyurethane layer absorbs stone chips and sand abrasion on roads like Al Shamal and Salwa, and its self-healing top layer closes light swirl marks from washing and dust. No film makes paint chip-proof, and VTEK notes that a scratch cutting all the way through the self-healing layer will not heal, which is why highway drivers should cover at least the full front.

VTEK says to wait about 7 days before an automatic car wash or pressure washing so the film dries completely, and to keep the pressure jet away from the film edges. Use ordinary car shampoo or detail spray, and avoid wax and sealants on the film. VTEK recommends a PPF-specific coating, such as Autotriz PPF & Vinyl Wrap Coating, once a year.

VTEK says it is highly unlikely, because factory paint bonds to the panel far more strongly than the film bonds to the paint. It still recommends having the film removed by a professional following its published guidelines, and old film on a car we are fitting is removed first.

Paint protection film should be made of TPU, thermoplastic polyurethane. VTEK Weather Armor is TPU-based, and VTEK backs it with a written 5 to 15 year warranty that you can look up in its e-warranty system. Be careful with films sold without a named manufacturer, a stated warranty term or a way to verify the installation, and ask any installer which film they use and where its warranty can be checked.

Yes, but the order matters. VTEK advises against putting a wax, sealant or ceramic coating on the paint before the film, because it lowers the film's grip on the paint; any coating goes on after installation. On top of the film VTEK recommends only a PPF-specific coating such as Autotriz PPF & Vinyl Wrap Coating, because most nano ceramic coatings are silicone-based and do not bond well to the film.

At a VTEK-authorised installer's centre in Doha, chosen by ABK. We confirm the location and drop-off instructions with your appointment slot. It is convenient from Mesaimeer, Al Rayyan, Lusail, West Bay, The Pearl, Al Wakrah and Al Khor.

Type your car's make and model in the quote builder search bar to automatically see its category and instant price. If your vehicle isn't listed or you prefer a tailored quote, select 'Not sure? Get a Custom Offer' and enter your make and model — our team will confirm the exact offer on WhatsApp.